How to Disable Latch Mode on the Low Current Receiver
Every USAutomatic Low Current Receiver features a "hold open" or latch mode feature that can be used for better commercial usage. P2, or relay 2, on the radio receiver can be configured to hold the gate open. In some cases it is desired to disable this feature. Once this procedure is complete, any keypad or remote that is paired to P2 will no longer lock the gate open.
Verify if Latch Mode is Enabled:
Press the P2 push-button until the green LED light comes on, then release. The green LED light should be flashing as a steady green LED indicates latch mode is already disabled on the receiver and continuing with this procedure is not necessary.
Disable Latch Mode (Return P2 Back to Momentary Mode):
Using the narrow tool, press and hold P2 until the green LED turns on until:
- The green LED light is flashing.
- As soon as the LED turns on, release P2 and immediately press and release P1.
- The green LED should turn from flashing to steady. Latch mode is now disabled.
Verifying Latch Mode After Disabled:
Press and hold P2 until the green LED light turns on. The green LED light should be steady. If the green LED light is flashing, Disable Latch Mode again and retry this step.