Usautomatic Sentry Linear Actuator Arm - 510300

The Sentry Series Linear Actuator Arm is designed for Swing Gate Openers with a maximum gate load of up to 400 lbs. and a maximum gate length of 20 ft. The arm connects to the gate and hinge post and contains the motor, gearbox limit switches, and extension tube. The Sentry Series Swing Gate Openers are solar compatible.


Included:

  • Motor
  • Gearbox Limit Switches
  • Extension Tube
  • Harness w/ 8 ft. Cable
  • Owner's Manual
Part Number: 510300

$427.79 each
OR

Details

Usautomatic Sentry Linear Actuator Arm - 510300

The UsAutomatic Sentry Linear Actuator Arm is specifically designed for Sentry Series Swing Gates and is proudly made in the USA. Easy to install, the Actuator Arm connects to the swing gate and hinge post and is a solar-friendly mechanism. This Actuator contains the motor, gearbox limit switches, extension tube, and owner's manual. This Actuator is a replacement arm for Sentry Swing Gate Operators to avoid having to replace an entire Swing Gate System. The actuator is designed to be a quick installation and saves both time and money. This particular model actuator has a black finish on the exterior, which improves the aesthetic appeal of the gate system. With its sleek and efficient design, this durable Sentry Actuator Arm replacement is durable and long-lasting with a non-corrosive exterior. Ideal for residential, light commercial, and farm or ranch applications, this Actuator for Sentry Swing Gate Openers has a maximum gate load of 800 lbs and a maximum gate length of 16 ft.

Included:

  • Motor
  • Gearbox Limit Switches
  • Extension Tube
  • Harness w/ 8 ft. Cable
  • Owner's Manual

Features

  • Made in the USA
  • Pull/Push to Open
  • Max Gate Load of 800 lbs
  • For Sentry Swing Gate Opener Systems
  • Non-Corrosive, Water-Resistant Actuator
  • Has A Black Finish to Match Sentry Operators
  • Actuator Arm Replacement Easy Installation Prolongs Life of System

Specifications

  • Model: Sentry
  • Opener Type: Swing
  • Solar Compatible: Yes
  • Maximum Gate Length: 16 ft.
  • Maximum Gate Weight: 800 lbs
  • Rated: Vehicular Class I, II, III, or IV
  • Power Input: 12 VDC Battery (Not Included)

Sentry installed and shown in the extended position. The Actuator must be installed level and attached to a horizontal cross member as shown.

Installation Tips

  • Install Nylon Washers and Bronze Bushings Into Rear of Actuator
  • Install the Linear Actuator Into Actuator Bracket
  • Secure The Actuator In Place Using 3/8 x 2 1/2" Shoulder Bolt and (2) 3/8 SAE Washers
  • Use 3/8 Nylon Lock Nut To Secure, Tighten But Do Not Over Tighten
  • Actuator Should Swing Freely*
SKU 510300
Operator Type Swing Operator
Product Type Actuator
Model Sentry HD
Solar Compatibility Yes
Maximum Gate Size 16 ft
Maximum Gate Weight 800 lbs.
Manufacturer USAutomatic, Inc.